By Manon Marianne. Engine Wiring. Publised at Friday, December 15th 2017, 22:27:34 PM. Pistons move up and down the cylinder. They look like upside down soup cans. When fuel ignites in the combustion chamber, the force pushes the piston downward, which in turn moves the crankshaft (see below). The piston attaches to the crankshaft via a connecting rod, aka the con rod. It connects to the connecting rod via a piston pin, and the connecting rod connects to the crankshaft via a connecting rod bearing.
By Marthe Mathilde. Engine Wiring. Published at Monday, January 08th 2018, 02:48:05 AM. Stability and control have been major roadblocks to the implementation of many advanced combustion modes. Many low-temperature combustion modes such as GCI and RCCI operate on the edge of stability—in other words, at conditions under which very small variations in engine boundary conditions (such as intake temperature) may result in unintended excursions that result in undesirable emissions, reduced efficiency, and the potential to destroy the engine or emissions control system. One can imagine the challenge of these types of combustion modes under ever-changing conditions of a real-world drive cycle where a single unintended excursion could be catastrophic. Meeting that challenge requires a control system which is predictive for avoidance rather than reactive after the occurrence of a potentially damaging event.
By Olivier Danielle. Electrical Wiring. Published at Sunday, January 07th 2018, 22:32:17 PM. Arc fault circuit interrupters (AFCIs) protect a home against electrical fires. ACFIs protect against fire-causing arcing much like GFCI’s protect against stray current. When an arc is detected, power to the circuit is interrupted. Arcing can be caused by any number of factors, including damaged or worn wires, incorrect wiring, and loose or wet connections. Newer AFCIs are able to distinguish between dangerous arc faults and normal arcing caused by fluorescent lighting and some dimmers and switches.
By Olivier Danielle. Engine Wiring. Published at Saturday, January 06th 2018, 17:57:56 PM. All actuators needed to work in concert to heat the oil fast and keep the temperature steady. Opening the grill shutters or running the electric air fan consumes power. Controlling actuators in concert is a new way of addressing thermal management. While more complex, it enables the system to arrive at a steady temperature quicker and under all operating conditions, which extends the life of each thermal-control actuator, Laboe says.
By Marthe Mathilde. Engine Wiring. Published at Tuesday, January 02nd 2018, 12:15:02 PM. The team ran simulations to maximize drivetrain efficiency and minimize fuel consumption under various driving conditions, and tested their model-based approach by delivering control commands to actuators that modulated powertrain heat on a test vehicle. They monitored engine coolant temperature, engine oil temperature, transmission oil temperature, and vehicle fuel consumption, and ultimately found no additional coolant pump power was necessary for rapid warm-up and control of the drivetrain oils.
By Elvire Fernande. Electrical Wiring. Published at Thursday, December 28th 2017, 09:14:31 AM. The long thick cables of transmission lines are made of copper or aluminum because theyhave a low resistance.
By Marthe Mathilde. Electrical Wiring. Published at Wednesday, December 27th 2017, 09:11:55 AM. In the second stage, the electrical equipment and the structures for the installation of wiring are transported to the construction site, installed in the planned locations, and assembled. In addition, cables and wires are laid and are connected to the installed electrical equipment. Electrical installation work is completed when the installed equipment is actuated and adjusted. The most complicated work in this respect is the adjustment of relay protection and automatic control systems for electric drives.
By Morgane Seraphine. Engine Wiring. Published at Tuesday, December 26th 2017, 18:19:29 PM. he combustion chamber in an engine is where the magic happens. It’s where fuel, air, pressure, and electricity come together to create the small explosion that moves the car’s pistons up and down, thus creating the power to move the vehicle. The combustion chamber is made up of the cylinder, piston, and cylinder head. The cylinder acts as the wall of the combustion chamber, the top of the piston acts as the floor of the combustion chamber, and the cylinder head serves as the ceiling of the combustion chamber.
Keyinsp - Source Of All Wiring Diagram
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.