specialized construction work that is performed during the erection or reconstruction of buildings or structures intended for various purposes and that entails the installation of electric wiring and electrical equipment. The electric wiring may be overhead power lines, cable lines, current leads, or interior wiring. Examples of electrical equipment include electric machinery, distribution centers, and control consoles. In the USSR, electrical installation work is usually carried out in two stages.
Feed the cables through the clamps and into the box. The cable sheathing (outer jacket) should extend 1/2 to 1 inch beyond the clamp, and the cable wires should extend about 6 inches into the box. If necessary, trim the wires as needed and strip 3/4 inch of insulation from the each of each wire, using wire strippers. Secure the cables by tightening the screws on the clamps, being careful not to overtighten and damage the cables.
Keyinsp - Source Of All Wiring Diagram
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.